Cuetec Cynergy Carbon Fiber Shaft Maintenance & Warranty
Apr 16, 2019 10:38:32 PM
Cynergy Shaft Maintenance
The Carbon Fiber Composite Shaft's maintenance is completely different than wood shafts. Using any sand paper or abrasive on the surface of the shaft will damage the shaft’s finish and eventually damage the shaft’s carbon fiber filaments. Avoid any polishing, sanding or treatment of the surface of the shaft with abrasives or chemicals of any kind as this will void the shaft’s warranty.
The Cuetec Cleaning Wipes are recommended in order to clean and maintain the Cynergy Shaft, do not use baby powder, hand chalk, talcum powder or other shaft treatments that are meant for wood shafts.
Changing the tip on your Cuetec Cynergy Shaft.
The Cuetec Cynergy carbon composite shafts feature a white sighting ferrule that makes it easier for cue tip replacement. Make sure that the ferrule is smooth before putting on the new tipWhen changing the tip. The minimum height of 1mm for the ferrule is mandatory in order to maintain the shaft’s warranty.
*Get the assistance of an authorized Cuetec Cues Dealer for all matters regarding cue maintenance and cue tip replacement.
Replacing the ferrule on your Cuetec Cynergy Shaft.
This operation must be done by an authorized Cuetec Cynergy repair dealer or repair center. It is essential as this is a complex process due to the complex nature of the bonding agents used and to ensure that no damage is done to the shaft’s carbon fiber filaments. To locate an authorized repair center near you, contact firstname.lastname@example.org.
Cuetec Cynergy carbon composite shafts feature a limited-lifetime warranty against warpage.
Cuetec Cynergy carbon composite shafts are not engineered to tolerate considerable lateral pressure. They should never be flexed excessively, hit on other objects or treated with any abrasives, whether they are solid or liquid.
Cuetec Cynergy carbon composite shaft diameters should never be modified. Any sanding, polishing or abrasive treatment could jeopardize the ultra-thin layers of carbon fiber filament and will immediately void the Cynergy shaft’s warranty.