These general guidelines can help you choose the powder that is right for you, but experience and personal preference also matter.

• The lower the number, the faster the powder.
• Speed 1 is the fastest powder and Speed 7 is the slowest.
• Longer tables over 14 feet work best with faster powders – speeds 1 through 4
• Shorter tables under 14 feet work best with slower powders – speeds 5 through 7
• You may need to try several speeds to find the powder that best suits your playing preference

Simple rules to remember using SunGlo powder on your table’s surface.

• Spray a thin layer of silicone and let it briefly air-dry before applying powder, that helps the powder do its job
• Powder is like hot sauce – only use a little and add more if you need it. It is easier to add more than take off too much
• If your powder is ‘snowplowing’, the cause is ALMOST ALWAYS too much powder. Try using less.
• While SunGlo powders are moisture resistant, they should be stored in a dry location. Your board will require occasion

NOTE:

• Shuffleboard Powder is one of the most important elements of playing the game. Our powders are engineered for wooden shuffleboard tables with a factory-installed epoxy finish.
• Not recommended for use on laminate surfaces.
• Results may vary on concrete, but SunGlo products have not been engineered or tested for use on concrete.